Machinery or related products shall be designed and constructed in such a way that the stability required by section 1.3.1 is maintained both in service and out of service, including all stages of transportation, assembly and dismantling, during foreseeable component failures and also during the tests carried out in accordance with the instructions for use. To that end, the manufacturer shall use the appropriate verification methods.
4.1.2.1
Risks due to lack of stability
Category 4.1 · General
4.1.2
Protection against mechanical risks
4.1.2.2
Machinery or related products running on guide rails and rail tracks
Category 4.1
4.1.1 For the purposes of section 4.1., the following definitions apply: 4.1.2 Protection against mechanical risks 4.1.2.2 Machinery or related products running on guide rails and rail tracks 4.1.2.3 Mechanical strength 4.1.2.4 Pulleys, drums, wheels, ropes and chains 4.1.2.5 Lifting accessories and their componentsReesly links every risk in your assessment to the relevant Essential Requirement and generates a Technical File and Declaration of Conformity already aligned with Regulation (EU) 2023/1230.
Request a free demoHow it works in Reesly
One requirement at a time, with evidence attached
For every Essential Requirement in the checklist, you note the solution adopted and attach photos or documents as proof of compliance, straight from your phone. Everything flows automatically into the Technical File and the Declaration of Conformity.
Chapter 4 checklist
Preview
4.1.2.1 Risks due to lack of stability
4.1.1 For the purposes of section 4.1., the followi…
4.1.2 Protection against mechanical risks
Attach photo evidence